Adapter Sleeves

HA 2334Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 2336Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3024Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3028Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3038Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 307Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 309Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 309 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 310Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 311Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3124Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3126 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 3126 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HA 3128Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3128 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HA 3130Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3132Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3134Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3136Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3138Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 313 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 3140Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 315Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 315 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 316Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 317Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 317 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 318Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 318 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 320Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 320 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HE 206Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 208Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 210Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 213Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 215Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 216Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 217Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 220Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 222Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2306Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2308Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2309Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2310Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2313Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2315Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2316Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2317Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2318Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2319Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2320Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2322Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2324Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2326Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2328Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2330Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 2332Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 308Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 309Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 309 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HE 310Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 310 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HE 311 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HE 3122Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3124Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE3126Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3128Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3128 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HE 313Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3130Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3132Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3134Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3136Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 3140Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 315Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 316Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 317Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 317 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HE 318Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 318 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HE 319Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 320Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

OH 2344 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2348 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2352 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2356 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3044 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3048 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3052 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3056 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3060 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3064 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3068 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3072 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3076 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3144 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip

OH 3148 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3148 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip

OH 3156 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3156 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip