Plummer Block Housing

W 15Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

AH 2340 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AHX2311Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AHX 2324 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AOH2348Withdrawal Sleeve Prepared For Oil InjectionWithdrawal Sleeve Size

FRB 10 130Locating RingInside DiameterOutside Diameter

FRB 3.5 72Locating RingInside DiameterOutside Diameter

FRB 7 62Locating RingInside DiameterOutside Diameter

H 207Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2312Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2316Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3034Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3040Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3128 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 322 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 3126Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 313Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3136 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HE 2311 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HM 52 T Lock Nut with A trapezoidal threadSizeTrapezoidal Thread

KM 27Lock Nut dimensions in accordance with ISO StandardSize

KM 29Lock Nut dimensions in accordance with ISO StandardSize

KM 32Lock Nut dimensions in accordance with ISO StandardSize

KMFE 14Lock Nut with locking screw, with external noseSize

KMK 10Lock Nut with an integral locking deviceSize

KML 34Lock Nut with A lower sectional heightSize

KML 40Lock Nut with A lower sectional heightSize

KMT 17Precision Lock Nut with locking pinsSize

KMT 18Precision Lock Nut with locking pinsSize

KMT 8Precision Lock Nut with locking pinsSize

KMTA 11Precision Lock Nut with locking pins, different thread pitchSize

KMTA 9Precision Lock Nut with locking pins, different thread pitchSize

MB 27Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 48Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 52Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MBL 34Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

This SE515-612 bearing is a Plummer Block Housing. The bearing's dimensions are 115x156x230mm.SE515-612Standard Plummer Block HousingHousing for Bearing on an Adapter Sleeve, Diameter Series 2

This SNLN3030 bearing is a Plummer Block Housing. The bearing's dimensions are 190x290x380mm.SNLN 3030Standard Plummer Block HousingGrey Cast IronHousing for bearings in the 30 dimension series

This SNLN3036 bearing is a Plummer Block Housing. The bearing's dimensions are 225x342x470mm.SNLN 3036Standard Plummer Block HousingGrey Cast IronHousing for bearings in the 30 dimension series

This SONL217-517 bearing is a Plummer Block Housing. The bearing's dimensions are 163x230x260mm.SONL 217-517Standard Plummer Block HousingGrey Cast IronHousing for bearings on A cylindrical seat or adapter sleeve, diameter series 2

This SYNT50FTS bearing is a Plummer Block Housing with locating ring position and high speed labyrinth seals. The bearing's dimensions are 70x131x210mm.SYNT50FTSBearing unit with A plummer block housingShaft DiameterBearing unit for the locating...

This SYNT50LTS bearing is a Plummer Block Housing with non-locating ring position and high speed labyrinth seals. The bearing's dimensions are 70x131x210mm.SYNT50LTSBearing unit with A plummer block housingShaft DiameterBearing unit for the...

This SYNT55F bearing is a Plummer Block Housing with locating ring position. The bearing's dimensions are 70x137x210mm.SYNT55FBearing unit with A plummer block housingShaft DiameterBearing unit for the locating bearing position

This SYNT55L bearing is a Plummer Block Housing with a larger than normal unit for the basic bore size. The bearing's dimensions are 70x137x210mm.SYNT55LBearing unit with A plummer block housingShaft DiameterBearing unit for the non-locating bearing...

This SYNT60FTS bearing is a Plummer Block Housing with locating ring position and high speed labyrinth seals. The bearing's dimensions are 80x151x230mm.SYNT60FTSBearing unit with A plummer block housingShaft DiameterBearing unit for the locating...

This SYNT60LTS bearing is a Plummer Block Housing with non-locating ring position and high speed labyrinth seals. The bearing's dimensions are 80x151x230mm.SYNT60LTSBearing unit with A plummer block housingShaft DiameterBearing unit for the...

This SYNT65F bearing is a Plummer Block Housing with locating ring position. The bearing's dimensions are 80x158x230mm.SYNT65FBearing unit with A plummer block housingShaft DiameterBearing unit for the locating bearing position

This SYNT65L bearing is a Plummer Block Housing with a larger than normal unit for the basic bore size. The bearing's dimensions are 80x158x230mm.SYNT65LBearing unit with A plummer block housingShaft DiameterBearing unit for the non-locating bearing...

W 13Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 16Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 21Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W26Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

AH 2236 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2238 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2308 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 2309 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 2313 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2332 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2334 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2336 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 2338 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 24024 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24026 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24028 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24030 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24032 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24034 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24036 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24038 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24040 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24122 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24124 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24126 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24128 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24130 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24132 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH24134 Withdrawal Sleeve Basic Design Withdrawal Sleeve Size

AH 24136 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24138 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 24140 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3032 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3034 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3036 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3038 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3040 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 308 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 309 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3132 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3134 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3136 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3138 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 313 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3140 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 314 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 315 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 316 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size

AH 3234 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3236 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3238 GWithdrawal Sleeve Basic DesignWithdrawal Sleeve SizeThread Diameter changed according to revised ISO standard

AH 3240 Withdrawal Sleeve Basic DesignWithdrawal Sleeve Size