Brands

This SYNT60L bearing is a Plummer Block Housing with a larger than normal unit for the basic bore size. The bearing's dimensions are 80x151x230mm.SYNT60LBearing unit with A plummer block housingShaft DiameterBearing unit for the non-locating bearing...

The TAF263416 is a Light Duty Open Type, Single Row Machined Needle Roller Bearing. This Bearing has no Inner Ring, meaning the Needle Rollers are mounted directly onto the shaft. As such, the Bearing has better running accuracy as it isn't affected...

This TIH030-Y6 is a replacement optional yoke 40x40x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030/230v is a small induction heater that combines high heating capacity with portability. This induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. This heating...

This TIH100/230v is a medium induction heater that offers the same high standards of efficiency and performance as the smaller heater, combined with increased capacity. This induction heater is equipped with thermal overheating protection to reduce the...

SKF offer a range of three different belt alignment tools to enable accurate alignment for most applications. The tools have been designed to be easy to use without special training, the laser position indicates the nature of misalignment allowing easy...

SKF thermometers are suitable for a wide range of applications, this thermometer has a wide temperature measurement range and has the option to accommodate up to two SKF temperature probes.Related DocumentsProduct Data Sheet 

SKF electrical discharge detector pen is a simple to use hand-held instrument for detecting electrical discharges ion electric motor bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Tachometers are fast and accurate instruments utilizing laser or contact to measure rotational and linear speeds.MeasurementRelated DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41 is a laser shaft alignment system with enhanced measuring and reporting. This alignment tool performs precise measurements in even the most challenging conditions. The ergonimic display unit with intuituve touch screen navigation makes...

This TKSA51-ROD80 is 4x replacement threaded rods of 80mm for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSAROD90 is 4x replacement threaded rods of 90mm for the TKSA31 and TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet 

This TLMP1008/120V is an SKF multi point automatic lubricator designed for reliable relubrication of multiple lubrication points. This automatic lubricatior has the ability to supply from one to eight lubrication points and is easy to install and program...

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF impact spanners help avoid nut and shaft damage, special wide impact face means the impact is applied effectivley to the nut.Related DocumentsProduct Data Sheet 

This TMFT36A15-35 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A15-35.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B25-47 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B25-47.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B25-52 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B25-52.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C45-85 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C45-85.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C55-120 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C55-120.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic puller kit combines the jaw puller and the strong back puller, the hydraulic spindle facilitates easy and quick dismounting, and it can be assembled as a three arm or two arm puller depending on the space and demands of the application...

The SKF hydraulic jaw puller kit contains three different arm lengths, suitable for a wide range of applications, it has self locking arms to minimise the risk of the puller slipping from the application when under load, and the hydraulic spindle is...

This TMHP10E-11 is a replacement 240mm long arm for the TMHP10E jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMHS5T is a replacement set containing extension pieces 50 and 100mm and the nosepiece for the TMHS75 advanced hydraulic spindle.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic pumps are mainly intended for larger SKF hudraulic nuts and SKF coupling hydraulic chambers, but they can also be used for applications where a maximum pressure of 50 MPa (7250 psi) is required.Related DocumentsProduct Data...

This TMMA120-2 is a replacement spindle with nose piece and adapter for the SKF TMMA120 hydraulic jaw puller set.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet Instructions for...

This TMMR16/35XL-5 is a replacement nose piece, spring loaded for TMMR 160F, 200F, 250F, 350F, 160XL, 200XL, 250XL and 350XL reversable jaw pullers.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR160F-1 is a replacement arm for the SKF TMMR160F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR4F/SET is a replacement set of 4 TMMR F pullers on puller stand for the SKF TMMR4F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use  

The SKF TWIM15 induction heater is a lightweight, portable and highly efficient bearing heater, equipped with a temperature and time controller and an automatic demagnetisation. this heater is perfect for bearings with a minimum bore diameter of 20mm to...

This ULS17 is a light, imperial series double row self aligning bearings with a steel cage and a standard internal clearance. The bearing's dimensions are 2.1/2x5x15/16 Inch.

This W6006 2RS1 SKF bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 30x55x13.W60062RS1Stainless SteelExtra Light Series30mm - Bore SizeRubber Seals on Both Sides of Bearing

This W61800-2RS1 bearing is a Sealed Thin Section Deep Groove Radial Ball Bearing with a standard radial internal clearance.The bearing's dimensions are 10x19x5mmw618002rs1Stainless SteelExtra Thin Section10mm - Bore SizeRubber Seals on Both Sides...

This W619 7 2Z SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 7x17x5.W619/7 2ZStainless SteelMetric, Extra Small7mm - Bore SizeStandardMetal Shields on Both Sides of...

This W61901 2Z bearing is a Stainless Steel, Shielded Thin Section Deep Groove Radial Ball Bearing with a standard radial internal clearance. The bearing's dimensions are 12x24x6.w619012zStainless SteelVery Thin Section12mm - Bore SizeMetal Shields...

This W6203 2Z SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 17x40x12.W62032ZStainless SteelLight Series17mm - Bore SizeMetal Shields on Both Sides of Bearing

This W625 SKF bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 5x16x5.W625 Stainless SteelMetric, Extra Small5mm - Bore SizeStandardOpen Type

This W626 2RS1 SKF bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 6x19x6.W626 2RS1Stainless SteelMetric, Extra Small6mm - Bore SizeStandardRubber Seals on Both Sides of...

Protorque Cogged High Power Wedge Belts are ideal where space and weight are limited. Due to their deeper cogged profile, these belts are able to transmit higher power compared to Classical V-Belts. The deep cogged cushion provides increased support for...

Protorque Cogged High Power Wedge Belts are ideal where space and weight are limited. Due to their deeper cogged profile, these belts are able to transmit higher power compared to Classical V-Belts. The deep cogged cushion provides increased support for...

This XXLJ30 R&M bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 30x55x13.

This YAR208-2RF bearing is a Self Lube Bearing Insert with contact seal with additional rubberized flinger on both sides of the bearing. The bearing's dimensions are 40mm Bore Size.YAR2082RFY-Bearing with Grub ScrewMetric ShaftContact Standard...

This YEL208-108-2FW bearing is a Self Lube Bearing Insert with contact seal with additional plain flinger on both sides of the bearing and bearing without lubrication holes. The bearing's dimensions are 38.1mm Bore Size.YEL208-1082FWY-Bearing with...

This YET207-104 bearing is a Self Lube Bearing Insert. The bearing's dimensions are 31.75mm Bore Size.YET207-104 Y-Bearing with Eccentric Locking CollarInch ShaftContact Standard Integral Seal

Protorque Wrapped Classical V-Belts are some of their most popular belts. Due to their versatility, they are ideal for almost any machine operating a standard classical section drive. These belts are durable, cost effective, and reliable. The polyester...

This 02875/02820 bearing is an imperial taper roller bearing. The bearing's dimensions are 1.25x2.875x0.875inchCone ReferenceCup Reference0287502820Imperial SeriesCone ReferenceImperial SeriesCup Reference

This 02878/02820 bearing is an imperial taper roller bearing. The bearing's dimensions are 1.375x2.875x0.875inchCone ReferenceCup Reference0287802820Imperial SeriesCone ReferenceImperial SeriesCup Reference

This 05062/05185d bearing is an imperial taper roller bearing. The bearing's dimensions are 0.625x1.8504x1.2499inchCone ReferenceCup Reference0506205185dImperial SeriesCone ReferenceImperial SeriesCup ReferenceDouble Cup

This 07093/07196 bearing is an imperial taper roller bearing. The bearing's dimensions are 0.9375x1.9687x0.5313inchCone ReferenceCup Reference0709307196Imperial SeriesCone ReferenceImperial SeriesCup Reference

This 07098/07204-b bearing is an imperial taper roller bearing. The bearing's dimensions are 0.9835x2.047x0.591inchCone ReferenceCup Reference0709807204bImperial SeriesCone ReferenceImperial SeriesCup ReferenceFlanged Cup

This 07098/07205 bearing is an imperial taper roller bearing. The bearing's dimensions are 0.9835x2.0472x0.591inchCone ReferenceCup Reference0709807205Imperial SeriesCone ReferenceImperial SeriesCup Reference

This 07100-90041 bearing is an imperial taper roller bearing. The bearing's dimensions are 1x1.9687x0.5313inchCone ReferenceAssembly Number0710090041Imperial SeriesCone ReferenceStandard PartAssembly Number

This 07100-sa/07196 bearing is an imperial taper roller bearing. The bearing's dimensions are 1x1.9687x0.5313inchCone ReferenceCup Reference07100sa07196Imperial SeriesCone ReferenceSpecial Feature BearingImperial SeriesCup Reference

This 07100/07196 bearing is an imperial taper roller bearing. The bearing's dimensions are 1x1.9689x0.5315inchCone ReferenceCup Reference0710007196Imperial SeriesCone ReferenceStandard BearingImperial SeriesCup ReferenceStandard Bearing

This 07100/07204 bearing is an imperial taper roller bearing. The bearing's dimensions are 1x2.047x0.591inchCone ReferenceCup Reference0710007204Imperial SeriesCone ReferenceImperial SeriesCup Reference

This 07100SA/07210X bearing is an imperial taper roller bearing. The bearing's dimensions are 1x2x0.5909inchCone ReferenceCup Reference07100SA07210XImperial SeriesCone ReferenceSAImperial SeriesCup ReferenceSpecial feature bearing...

This 09067/09195 bearing is an imperial taper roller bearing. The bearing's dimensions are 0.75x1.9382x0.7098inchCone ReferenceCup Reference0906709195Imperial SeriesCone ReferenceStandard BearingImperial SeriesCup ReferenceStandard Bearing

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 101040/101080 bearing is a gamet single row plain cup taper roller bearings. The bearing's dimensions are 40x80x24.75.

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 1017-15GHLT bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a high/low temperature bearing insert. The bearing's dimensions are 15mm Shaft Diameter.101715GHLTSpherical Outside DiameterBasic Group15 mm...

This 1017-17G bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility. The bearing's dimensions are 17 mm Shaft Diameter.101717GSpherical Outside DiameterBasic Group17 mm Shaft DiameterRe-greaseable

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 1020-20GHLT bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a high/low temperature bearing insert. The bearing's dimensions are 20mm Shaft Diameter.102020GHLTSpherical Outside DiameterBasic Group20 mm...

This 1025-1G bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility. The bearing's dimensions are 1 Inch Shaft Diameter.10251GSpherical Outside DiameterBasic Group1 Inch Shaft DiameterRe-greaseable

This 1025-7/8G bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility. The bearing's dimensions are 7/8 Inch Shaft Diameter.10257/8GSpherical Outside DiameterBasic Group7/8 Inch Shaft DiameterRe-greaseable

This 102949/102910 bearing is an imperial taper roller bearing. The bearing's dimensions are 1.7811x2.8909x0.7701inchCone ReferenceCup Reference102949102910Imperial SeriesCone ReferenceStandard BearingImperial SeriesCup ReferenceStandard Bearing

This 102949/102910 bearing is an imperial taper roller bearing. The bearing's dimensions are 1.7811x2.8909x0.7701inchCone ReferenceCup Reference102949102910Imperial SeriesCone ReferenceStandard BearingImperial SeriesCup ReferenceStandard Bearing

This 1030-1.1/8GHLT bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a high/low temperature bearing insert. The bearing's dimensions are 1.1/8 Inch Diameter.10301.1/8GHLTSpherical Outside DiameterBasic Group1...

This 1035-1.3/8G bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility. The bearing's dimensions are 1.3/8 Inch Shaft Diameter.10351.3/8GSpherical Outside DiameterBasic Group1.3/8 Inch Shaft DiameterRe-greaseable

This 1035-1.7/16DECG bearing is a Self Lube Bearing Insert with an eccentric collar lock and a long inner ring, bearing insert with relubrication facility. The bearing's dimensions are 1.7/16 Inch Diameter.10351.7/16DECGSpherical Outside...

This 104948/104910 bearing is an imperial taper roller bearing. The bearing's dimensions are 1.9685x3.2283x0.8465inchCone ReferenceCup Reference104948104910Imperial SeriesCone ReferenceStandard BearingImperial SeriesCup ReferenceStandard Bearing

This 105 Hoffmann bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance. The bearing's dimensions are 5x19x6.10501.3/4GHLTSpherical Outside DiameterBasic Group1.3/4 Inch Shaft DiameterRe-greaseable, High/Low...

This 105120/105165C bearing is a gamet single row flanged cup taper roller bearings. The bearing's dimensions are 120x165x28.

This 1055-50KG bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a tapered bore. The bearing's dimensions are 50mm Shaft Diameter.105555GFSSpherical Outside DiameterBasic Group55 mm Shaft DiameterRe-greaseable, 2...

This 1060-60DECG bearing is a Self Lube Bearing Insert with an eccentric collar lock and a long inner ring, bearing insert with relubrication facility. The bearing's dimensions are 60mm Shaft Diameter.106060DECGSpherical Outside DiameterBasic...

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 1085-80GHLT bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a high/low temperature bearing insert. The bearing's dimensions are 80 mm Shaft Diameter.108580GHLTSpherical Outside DiameterBasic Group80...

This 108TN9/C3 bearing is a double row, metric self aligning bearing with a glass fibre reinforced PA66 cage and a larger than normal radial internal clearance. The bearing's dimensions are 8x22x7.108TN9C3Double Row Self AligningGlass Reinforced...

This 1090-85GHLT bearing is a Self Lube Bearing Insert with a bearing insert with relubrication facility and a high/low temperature bearing insert. The bearing's dimensions are 85mm Shaft Diameter.

This 110PP Hoffmann bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance. The bearing's dimensions are 10x30x9.

This 112045/112085C bearing is a gamet single row flanged cup taper roller bearings. The bearing's dimensions are 45x85x20.63.

This 11207TN9 bearing is a double row, metric self aligning bearing with a glass fibre reinforced PA66 cage and a normal radial internal clearance. The bearing's dimensions are 35x72x17.11207TN9 Double Row Self AligningGlass Reinforced Polyamide...

This 1125-25CG bearing is a Self Lube Bearing Insert with a parallel outside diameter insert with grease groove and snap ring fitted. The bearing's dimensions are 25 mm Shaft Diameter.112525CGParallel Outside DiameterBasic Group25 mm Shaft...

This 112AC is a light, metric series single row angular contact bearing with a standard internal clearance. The bearing's dimensions are 12x32x10mm

This 1135-1.1/4CG bearing is a Self Lube Bearing Insert with a parallel outside diameter insert with grease groove and snap ring fitted. The bearing's dimensions are 1.1/4 Inch Diameter.11351.1/4CGParallel Outside DiameterBasic Group1.1/4 Inch Shaft...

This 1140-1.1/2 bearing is a Self Lube Bearing Insert. The bearing's dimensions are 1.1/2 Inch Shaft Diameter.11401.1/2 Parallel Outside DiameterBasic Group1.1/2 Inch Shaft DiameterNot Re-greaseable

This 1150-1.15/16 bearing is a Self Lube Bearing Insert. The bearing's dimensions are 1.15/16 Inch Diameter.11501.15/16 Parallel Outside DiameterBasic Group1.15/16 Inch Shaft DiameterNot Re-greaseable

This 1155-2 bearing is a Self Lube Bearing Insert. The bearing's dimensions are 2 Inch Shaft Diameter.11552 Parallel Outside DiameterBasic Group2 Inch Shaft DiameterNot Re-greaseable

This 1155-2.3/16CG bearing is a Self Lube Bearing Insert with a parallel outside diameter insert with grease groove and snap ring fitted. The bearing's dimensions are 2.3/16 Inch Diameter.11552.3/16CGParallel Outside DiameterBasic Group2.3/16 Inch...

This 1201ETN9 bearing is a double row, extra narrow series, metric self aligning bearing with an optimized internal design for increased load carrying capacity, a glass fibre reinforced PA66 cage and a normal radial internal clearance. The...

This 1202JC3 bearing is a double row, extra narrow series, metric self aligning bearing with a steel cage and a larger than normal radial internal clearance. The bearing's dimensions are 15x35x11.1202 jc3Extra NarrowBore Size - 15mm Pressed Steel...

This 1203-TVH bearing is a double row, extra narrow series, metric self aligning bearing with a solid cage made from glass fibre reinforced polyamide 66 and a normal radial internal clearance. The bearing's dimensions are 17x40x12.1203 TVH Extra...

This 1204-TVH bearing is a double row, extra narrow series, metric self aligning bearing with a solid cage made from glass fibre reinforced polyamide 66 and a normal radial internal clearance. The bearing's dimensions are 20x47x14.1204 TVH Extra...

This 1204-TVH-C3 bearing is a double row, extra narrow series, metric self aligning bearing with a solid cage made from glass fibre reinforced polyamide 66 and a larger than normal radial internal clearance. The bearing's dimensions are 20x47x14...