Call Us
-- or search by size --
X
X
Call Us
UCFX13 - FYH Square Flanged Bearing Unit - 65mm Inside Diameter
Discover the UCFX13 from FYH, the perfect solution for your flanged assembly requirements. This Square Flanged Bearing Unit comes pre-lubricated and fitted with a sealed Bearing Insert for the highest durability and longevity. Crafted from high-quality cast iron, the UCFX13 Unit boasts exceptional strength and reliability, making it suitable for a wide range of applications. This medium duty four-bolt flanged unit has hexagon socket set screws and a 65mm shaft diameter.
The convex shape of the Bearing Inserts outer ring along with the concave sphered shape inside the housing gives this UCFX13 Square Flanged Unit the ability to self-align, adjust for shaft deviation, and reduce abnormal load.
The UCFX13 Bearing Unit has a UCX13 Bearing Insert which can be easily removed from the FX13 housing and replaced. Other compatible inserts can be used in the same housing.
Fitted with a new sealed Bearing Insert and housing, the UCFX13 ensures smooth operation, easy mounting, and high reliability, guaranteeing optimal performance in diverse environments.
The UCFX13 allows for effortless re-lubrication via the grease hole and a grease fitting, promoting smooth operation and prolonging the lifespan of the bearing assembly.
These Flanged Housing Units are relied upon in many industries, including mining, agriculture, manufacturing and production, and industrial engineering.
Constructed with a single cast housing piece, the UCFX13 offers basic protection against corrosion, enhancing durability and longevity.
For bulk discount on this product, contact our dedicated sales team today by filling out the below form:
We have one of the largest online stocks of bearings and ancillary components avalable online anywhere in the world, and we take pride in great customer service, superb products, and express delivery to all 50 mainland US States.
1-3 Day Service |
 |
 |
 |
| Order Value | Delivery Cost |
|---|---|
| $0.00 to $500.00 | $30.00 |
| Over $500.00 | Free Of Charge |
Below are the description and part numbers to the additional spare parts you can purchase with your product.
There are a few different ways in which you can identify which bearing you require for your machine,
Almost all bearings that we supply will be stamped with the bearing reference on the side,
 |
 |
 |
 |
| On the Inner Race | On the Outer Race | On the Metal Shield | On the Rubber Seal |
These part numbers sometime are not the easiest to read therefore the bearing might require cleaning with an oily rag, or you may need a magnifying glass to see what the part number is.
Once you have found the part number then type that into our search box at the top of the page or use the search box below and you should find the bearing you are looking for.
If you cannot find the part number or the bearing is worn or damaged, you will need to measure the bearing to figure out which part you need. To do this you will need to use a Vernier caliper, and you will need to get three dimensions.
 |
 |
 |
| Inside Diameter | Outside Diameter | Width |
These three measurements will give you the dimensions that you will need to find the bearing you are searching for. Once you have the dimension sizes, type it into our search box in the following order; Inside Diameter, Outside Diameter, and width and our search engine will feed back the products that fit those dimensions.
We offer full certification with all the products we sell, you can ask for Certificate’s of Conformity or Certificate of Analysis at the time of placing the order and we will issue these with your Order. (this may incur a small cost depending on the manufactures terms and conditions).
All the products we sell are bought either Directly from the manufacturers or through their approved supplier network, so we can guarantee that you only receive 100% genuine products every time you place an order with us.
UK and Europe – VAT will be charged at the checkout stage and will be refunded if a valid VAT number is supplied
USA and Canada – All taxes and duties are payed by Quality Bearings Online, so you don’t have to worry about your package being held up in customs.
Rest of the World – Taxes and Duties will have to paid within the destination Country (these will differ depending on the Country) DHL will contact you and let you know how much is needed for the shipment to get to its final destination - our sales team would be happy to clarify any of these points at the point of Order.
We do accept Credit Accounts subject to approval – please contact any member of our sales team on 0808 168 1234 and we will be happy to assist you
This question normally comes down to the environment the bearings are being used it. For example, if the bearing is being used in a moist environment then you’d choose rubber or metal as the metal is more likely to rust.
If the environment is very contaminated, then you might choose a rubber seal to keep the contaminants from damaging the inside of the bearing.
Your decision could also come down to the temperature the bearing needs to work to or the speeds it needs to reach.
FYH
FYH
FYH
FYH
FYH
