Adapter Sleeves

H 2305Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 306 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2307Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 315Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 316Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 318Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 306Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3028Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2309Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 311Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 313Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 307Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 309Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 319Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 205Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 208Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2311Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2315Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 308Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 312Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3120Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 314Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

HE 218Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 315 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2308Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2314Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H3032 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

HE 209Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 306Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

OH 3144 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

H 216Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2310Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3036Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H307 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 308 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

OH 3152 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

H 209Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 210Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2328Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2338Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3024Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 309 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 310Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 310 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H319 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 320Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 320 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 2311Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HE 211 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HE 322 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 207Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2312Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2316Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3034Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3040Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3128 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 322 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 3126Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 313Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3136 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HE 2311 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HE 322Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

H 204Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H205 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H206 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 206Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H208 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H209 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 210Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H211 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 211Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H212 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 212Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H213 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 213Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H215 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 215Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H216 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H217 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 217Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H218 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 218Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 219Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 219Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H220 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 220Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 222Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 222Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H2305 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 2306Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2306Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H2307 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 2308 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2310Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2311Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H2313 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H 2313Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2313 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H2314 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size

H2316 Adapter Sleeve dimensions in accordance with ISO standard, Basic Design Adapter Sleeve Size