Sleeves, Nuts and Washers

KMTA 10Precision Lock Nut with locking pins, different thread pitchSize

KMTA 13Precision Lock Nut with locking pins, different thread pitchSize

KMTA 14Precision Lock Nut with locking pins, different thread pitchSize

KMTA 16Precision Lock Nut with locking pins, different thread pitchSize

KMTA 17Precision Lock Nut with locking pins, different thread pitchSize

KMTA 18Precision Lock Nut with locking pins, different thread pitchSize

KMTA 19Precision Lock Nut with locking pins, different thread pitchSize

KMTA 20Precision Lock Nut with locking pins, different thread pitchSize

KMTA 22Precision Lock Nut with locking pins, different thread pitchSize

KMTA 24Precision Lock Nut with locking pins, different thread pitchSize

KMTA 26Precision Lock Nut with locking pins, different thread pitchSize

KMTA 28Precision Lock Nut with locking pins, different thread pitchSize

KMTA 30Precision Lock Nut with locking pins, different thread pitchSize

KMTA 32Precision Lock Nut with locking pins, different thread pitchSize

KMTA 34Precision Lock Nut with locking pins, different thread pitchSize

KMTA 36Precision Lock Nut with locking pins, different thread pitchSize

KMTA 38Precision Lock Nut with locking pins, different thread pitchSize

KMTA 40Precision Lock Nut with locking pins, different thread pitchSize

KMTA 5Precision Lock Nut with locking pins, different thread pitchSize

KMTA 6Precision Lock Nut with locking pins, different thread pitchSize

KMTA 7Precision Lock Nut with locking pins, different thread pitchSize

MB 18Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 23Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 24Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 25Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 30Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 34Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 36Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 38Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB44Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MB 56Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size

MBL 24Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 26Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 28Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 30Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 32Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 36Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 38Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

MBL 40Lock Washer dimensions in accordance with ISO standard for KML lock nutLock Washer Size

OH 2344 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2348 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2352 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 2356 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3044 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3048 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3052 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3056 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3060 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3064 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3068 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3072 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3076 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3144 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip

OH 3148 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3148 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip

OH 3156 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3156 HTLAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end, with lock nut with lower sectional heignt but with key slot positions for A locking clip

OH 3160 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3164 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

OH 3260 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

W 00 Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 03Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W0 40Lock Washer dimensions in accordance with ANSI standard without an axial tab for an N0 (light section) lock nutLock Washer Size

W0 44Lock Washer dimensions in accordance with ANSI standard without an axial tab for an N0 (light section) lock nutLock Washer Size

W 17Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 18Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 19Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 20Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W22Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 24Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 28Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 30Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 32Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 34Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 38Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 40Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

W 44Lock Washer dimensions in accordance with ANSI standard with an axial tab for an N or AN locknutLock Washer Size

HA 211Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

FRB 5.5 85Locating RingInside DiameterOutside Diameter

MB 20Lock Washer dimensions in accordance with ISO standard for KM lock nutLock Washer Size