Adapter Sleeves

H 2305Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 306 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2307Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 315Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 316Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 318Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 306Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3028Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2309Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 311Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 313Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 307Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 309Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 319Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 205Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 208Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2315Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 308Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 312Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3120Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 314Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

HE 218Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 315 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2308Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2314Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

HE 209Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

HE 306Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

OH 3144 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

H 216Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2310Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3036Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 308 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

OH 3152 HAdapter Sleeve dimensions in accordance with ISO standard, Prepared for Oil InjectionAdapter Sleeve SizeOne oil supply duct at the threaded end

H 209Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 210Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2328Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2338Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 309 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 310Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 310 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 320Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 320 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 2311Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HE 211 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HE 322 EAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 207Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2312Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2316Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3034Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3040Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3128 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 322 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

HA 3126Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 313Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve Size

HA 3136 LAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/16 in.Adapter Sleeve SizeWith A lock nut with lower sectional height

HE 2311 BAdapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Sizeone or two oil supply ducts at the end opposite the threaded section

HE 322Adapter Sleeve dimensions in accordance with ISO standard, Except the bore, in 1/4 in.Adapter Sleeve Size

H 204Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 206Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 211Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 212Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 213Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 215Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 217Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 218Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 219Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 220Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 222Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2306Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2308 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2311Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2313Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2313 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2317Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2318Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2319Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2320Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2320 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2322Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2322 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2324Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2324 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 2324 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 2326Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2326 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 2330Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2332Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2332 LAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve SizeWith A lock nut with lower sectional height

H 2334Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2336Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 2340Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3024Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3026Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3030Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3032Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 3038Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 305Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size

H 307 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 311 EAdapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Sizewithout key slot, with A KMFE lock nut or with A HME lock nut

H 3122Adapter Sleeve dimensions in accordance with ISO standard, Basic DesignAdapter Sleeve Size