European (BS) Standard

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Triplex chain has a 1...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

Used on short pitch chains only. Supplied with two connecting pins riveted into the outer plate, the clearance fit connecting plate being secured by means of a spring clip, No. 27, which snaps into the grooves in the pins.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 1.1/4...

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 1.1/4...

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 1.1/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

Used on short pitch chains only. Supplied with two connecting pins riveted into the outer plate, the clearance fit connecting plate being secured by means of a spring clip, No. 27, which snaps into the grooves in the pins.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 1.1/4...

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 1.1/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

Used on short pitch chains only. Supplied with two connecting pins riveted into the outer plate, the clearance fit connecting plate being secured by means of a spring clip, No. 27, which snaps into the grooves in the pins.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Triplex chain has a 1.1/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 1.1/2...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 1.1/2...

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Triplex chain has a 1.1/2...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

Used on short pitch chains only. Supplied with two connecting pins riveted into the outer plate, the clearance fit connecting plate being secured by means of a spring clip, No. 27, which snaps into the grooves in the pins.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 1.3/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 1.3/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Triplex chain has a 1.3/4...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Simplex chain has a 2...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 2 Inch...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.

This Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Triplex chain has a 2...

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over...

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin.

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin.