Maintenance Tools

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The SKF Grease Filler PumpRelated DocumentsProduct Data Sheet  Instructions for Use  

This LAOS09224 is a 10 litre (2.6 US gal) drum, designed with a wide neck and a standard thread size, it fits any LAOS lid and is available in 4 other sizes.Related DocumentsProduct Data Sheet 

This LAPN12 is a G1/4 - M12 connection nipple for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This LAPN12x1.5 is a G1/4 - M12 x 1.5 connection nipple for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This TIH030-Y6 is a replacement optional yoke 40x40x215mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100/MV is a medium induction heater that offers the same high standards of efficiency and performance as the smaller heater, combined with increased capacity. This induction heater is equipped with thermal overheating protection to reduce the...

This TIH220-SLDR is a replacement sliding rail for the TIH220M series Large induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF offer a range of three different belt alignment tools to enable accurate alignment for most applications. The tools have been designed to be easy to use without special training, the laser position indicates the nature of misalignment allowing easy...

SKF thermometers are suitable for a wide range of applications, this thermometer has a wide temperature measurement range and has the option to accommodate up to two SKF temperature probes.Related DocumentsProduct Data Sheet 

SKF electrical discharge detector pen is a simple to use hand-held instrument for detecting electrical discharges ion electric motor bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Tachometers are fast and accurate instruments utilizing laser or contact to measure rotational and linear speeds.MeasurementRelated DocumentsProduct Data Sheet  Instructions for Use 

This TKSAROD90 is 4x replacement threaded rods of 90mm for the TKSA31 and TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet 

This TLMP1008/120V is an SKF multi point automatic lubricator designed for reliable relubrication of multiple lubrication points. This automatic lubricatior has the ability to supply from one to eight lubrication points and is easy to install and program...

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF impact spanners help avoid nut and shaft damage, special wide impact face means the impact is applied effectivley to the nut.Related DocumentsProduct Data Sheet 

This TMFT36A15-35 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A15-35.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B25-47 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B25-47.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36B25-52 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size B25-52.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C45-85 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C45-85.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36C55-120 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size C55-120.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic puller kit combines the jaw puller and the strong back puller, the hydraulic spindle facilitates easy and quick dismounting, and it can be assembled as a three arm or two arm puller depending on the space and demands of the application...

The SKF hydraulic jaw puller kit contains three different arm lengths, suitable for a wide range of applications, it has self locking arms to minimise the risk of the puller slipping from the application when under load, and the hydraulic spindle is...

This TMHP10E-11 is a replacement 240mm long arm for the TMHP10E jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMHS5T is a replacement set containing extension pieces 50 and 100mm and the nosepiece for the TMHS75 advanced hydraulic spindle.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic pumps are mainly intended for larger SKF hudraulic nuts and SKF coupling hydraulic chambers, but they can also be used for applications where a maximum pressure of 50 MPa (7250 psi) is required.Related DocumentsProduct Data...

This TMMA120-2 is a replacement spindle with nose piece and adapter for the SKF TMMA120 hydraulic jaw puller set.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet  Instructions...

The SKF jaw pullers are one of the most common tools for dismounting small to medium size bearings, the SKF puller helps to safeguard against damage to the bearing or the seating during dismount.Related DocumentsProduct Data Sheet Instructions for...

This TMMR16/35XL-5 is a replacement nose piece, spring loaded for TMMR 160F, 200F, 250F, 350F, 160XL, 200XL, 250XL and 350XL reversable jaw pullers.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR160F-1 is a replacement arm for the SKF TMMR160F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMMR200F-1 is a replacement arm for the SKF TMMR200F reversible jaw puller.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF TWIM15 induction heater is a lightweight, portable and highly efficient bearing heater, equipped with a temperature and time controller and an automatic demagnetisation. this heater is perfect for bearings with a minimum bore diameter of 20mm to...

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This 227965/100mpa G1/8 extension pipe enables the use of an SKF hydraulic pump to connecto to a sleeve connection hole with a G1/8 thread.Related DocumentsProduct Data Sheet 

This 729124-3 is a repair kit for the 729124 hydraulic pump.Repair Kit Contents6x O-Rings, 1x Copper Washer, 1x Composite Rod Seal, 4x 7/32" Balls, and 1x 3/32" Ball.Related DocumentsProduct Data Sheet  Instructions for Use  

This 729124-5 is a replacement oil container tube for the 729124 hydraulic pump.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Provide a wide range of connection nipples covering many different sizes and thread combinations, they are used as adapters to enable hoses and pipes to be connected to different thread sizes.Related DocumentsProduct Data Sheet 

This HMV13/233983 is a replacement o-ring set for the SKF HMV13E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic nuts are used to facilitate easy and quick application of the high drive-up forces required for mounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMV26/233983 is a replacement o-ring set for the SKF HMV26E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMV30/233983 is a replacement o-ring set for the SKF HMV30E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic nuts are used to facilitate easy and quick application of the high drive-up forces required for mounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMV34/233983 is a replacement o-ring set for the SKF HMV34E SKF hydraulic nut.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF hydraulic nuts are used to facilitate easy and quick application of the high drive-up forces required for mounting bearings.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMVM10/29 Maintenance set contains threaded pins, copper rings and hexagonal keys for hydraulic nut sizes between 10 and 29.Related DocumentsProduct Data Sheet  Instructions for Use 

This HMVM30/69 Maintenance set contains threaded pins, copper rings and hexagonal keys for hydraulic nut sizes between 30 and 69.Related DocumentsInstructions for Use 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This HN12-13 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This HN14 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

The unique design of the SKF HN../SNL hook spanners, allows it to be used inside the SNL and SNH bearing housings. the large contact area of the hook spanner provides excellent grip and force on the nut.Related DocumentsProduct Data Sheet 

This HN21-22 SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

This HN7- SKF hook spanner is designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN981 standard.Related DocumentsProduct Data Sheet 

One SKF hook spanner will cover several nut sizes, making it suitable for use with many applications.Related DocumentsProduct Data Sheet 

One SKF hook spanner will cover several nut sizes, making it suitable for use with many applications.Related DocumentsProduct Data Sheet 

This LAGF1-F is a replacement flexible hose with filler nipple for use on the SKF LAGF grease filler pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This LAOS09842 is a red coloured stretch spout, this spout is ideal for precise pouring tasks and difficult to access points. The 12mm (0.48in) outlet is ideal for viscosities up to ISO VG 220.Related DocumentsProduct Data Sheet 

This LAOS62437 is a yellow coloured stretch spout, this spout is ideal for precise pouring tasks and difficult to access points. The 12mm (0.48in) outlet is ideal for viscosities up to ISO VG 220.Related DocumentsProduct Data Sheet 

This LAPB5-16/2K is an elevator kit for 5mm, 9mm or 16mm rails, this kit includes 2x brush holders with 5mm, 9mm & 16mm felt, 2x lubricators (LAGD125/HMT68), 2x installation brackets & 50ml (1.7 fl oz US) bottle oil.Related DocumentsProduct Data...

This LAPN6 is a G1/4 - M6 connection nipple for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This LAPN8x1 is a G1/4 - M8x1 connection nipple for SKF system 24 automatic lubricators.Related DocumentsProduct Data Sheet 

This SM20LP-ASTR is a low profile vibracon chock, this chock has been designed as an economic solution for repair projects or fixed design systems where expensive milled chocks, shims or epoxy resins were applied previously. .Related DocumentsProduct...

This SMAT008 adjustment tool is designed for safe height alteration of the SKF vibracon chocks with comfort, this adjustment tool brings efficiency and cost savings to the installation of rotating components. This tool is suitable for the SKF SM20 - SM24...

This TDTC1/C is a size C general SKF toolcase without inlay.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-2 is a replacement set of hoses for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-P230v is a replacement power print for the TIH030/230v small induction heater.Related DocumentsProduct Data Sheet  

This TIH100-Y4 is a replacement standard yoke 28x28x296mm for use on the TIH100 series medium induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100-Y6 is a replacement optional yoke 40x40x296mm for use on the TIH100 series medium induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIHRC is a replacement remote control for use on the TIH series bearing induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIHSNUBBER is a replacement snubberboard for use on the TIH series bearing induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKBA40-CA is a replacement toolcase with inlay for the SKF TKBA40 belt alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKGT1-RK3 is the SKF refill kit 3 fpr the SKF TKGT1 grease testing kit, this kit contains 2x glass plates, 1x plastic mask, 4x paper pack (50 sheets each).Related DocumentsProduct Data Sheet  Instructions for Use 

This TKRS41 is a high performance stroboscope, this tool is used for visually inspecting running machines and for determining the machine speed. This stroboscope offers high birhgtness and operating time, slow mode, automatic laser synch and professional...

This TKRT-RTAPE is a replacement reflective tape roll for the SKF TKRT10 digital tachometer.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKRT10-ADAPT is a set of 3 replacement contact adapters with moutning support for the SKF TKRT10 digital tachometer.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-DU is a replacement display unit for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA71-S is a replacement S measuring unit including USB cable for the TKSA71 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA71-WPODS is 2x replacement wireless charging pods including split USB cable for TKSA 71 series shaft alignement system.Related DocumentsProduct Data Sheet  Instructions for Use 

This TLMR201-1 is a replacement M12-A plug for the TLMR201 electro mechanical single point automatic lubricant dispenser.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.Related DocumentsProduct Data Sheet 

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.TMAS50/Kit Pack Content - 50x50ThicknessQuantity 0.05mmx20 0.10mmx20 0...

SKF machinery shims are used for accurate machine adjustments, the single slot pre-cut shims are available in five different dimensions and in ten thicknesses.TMAS75/Kit Pack Content - 75x75ThicknessQuantity 0.05mmx20 0.10mmx20 0...

The SKF blind housing puller kit allows a wide range of deep groove bearings to be dismounts, and with the seelf-locking nose piece it helps minimise damage to the shaft and improves the stability of the puller.TMBP 20E Pack ContentAdapter...

The SKF strong bac pullers facilitate the dismounting of bearings where the lack of space or demands for long reach means traditional jaw pullers are not suitable.TMBS 50E Pack ContentSeparator Setx1 Mechanical Spindlex1 Beamx1 Main...

This TMCD10R is a horizontal dial gauge for HMV-E series hydraulic nuts.Related DocumentsProduct Data Sheet 

This TMFT36A10-35 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A10-35.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36A12-32 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A12-32.Related DocumentsProduct Data Sheet  Instructions for Use 

This TMFT36A17-47 is a replacement impact ring for the TMFT36 bearing fitting tool kit, size A17-47.Related DocumentsProduct Data Sheet  Instructions for Use