Maintenance Tools

This SM42-SS is a stainless steel vibracon adjustable chock, designed to met harsh conditions where requirements cannot be met by carbon steel surface treated chocks. Mating surfaces are treated with additives to avoid the parts seizing when rotated...

This SM42LP-ASTR is a low profile vibracon chock, this chock has been designed as an economic solution for repair projects or fixed design systems where expensive milled chocks, shims or epoxy resins were applied previously. .Related DocumentsProduct...

This SM48-CS is an SKF vibracon adjustable chock, This chock provides an economic solution for environmentally less demanding applications, while guaranteeing a lifetime reliable chocking.Related DocumentsProduct Data Sheet  Instructions for...

This SM48-CSTR is a surface treated vibracon chock, this chock has been specially developed to deal with humid and salty climates where protection against corrosion is recommended, all parts of this chock are treated individually to guarantee an optimal...

This SM56-CS is an SKF vibracon adjustable chock, This chock provides an economic solution for environmentally less demanding applications, while guaranteeing a lifetime reliable chocking.Related DocumentsProduct Data Sheet  Instructions for...

This SM64-CS is an SKF vibracon adjustable chock, This chock provides an economic solution for environmentally less demanding applications, while guaranteeing a lifetime reliable chocking.Related DocumentsProduct Data Sheet  Instructions for...

This SMAT006LP-3 adjustment tool is designed for safe height alteration of the SKF vibracon chocks with comfort, this adjustment tool brings efficiency and cost savings to the installation of rotating components. This tool is suitable for the SKF SM12 LP...

This SMAT006LP-4 adjustment tool is designed for safe height alteration of the SKF vibracon chocks with comfort, this adjustment tool brings efficiency and cost savings to the installation of rotating components. This tool is suitable for the SKF SM24 LP...

This SMAT010 adjustment tool is designed for safe height alteration of the SKF vibracon chocks with comfort, this adjustment tool brings efficiency and cost savings to the installation of rotating components. This tool is suitable for the SKF SM30 - SM48...

This SMAT012 adjustment tool is designed for safe height alteration of the SKF vibracon chocks with comfort, this adjustment tool brings efficiency and cost savings to the installation of rotating components. This tool is suitable for the SKF SM56 - SM64...

This SMSW20-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW20-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This SMSW24-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW24-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This SMSW27-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW27-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This SMSW30-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW36-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW42-ASTR is an SKF spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent the bolt from...

This SMSW42-LPAST is an SKF low profile spherical washer designed to create an exact, parrallel plane between the bolt head and the face of the nut. These washers automatically adjust and compensate for the angular deviation between planes and prevent...

This TDTC1/A is a size A general SKF toolcase without inlay.Related DocumentsProduct Data Sheet  Instructions for Use 

This TDTC1/B is a size B general SKF toolcase without inlay.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAP030E is an air driven pump, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels.Related DocumentsProduct Data...

this THAP030E-10 is a repair kit for the SKF THAP030E air driven pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAP030E/SK1 is an air driven pump set, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels This set contains 1x THAP030E - air driven pump,...

The SKF air-driven hydraulic pumps are available in four different pressure versions. they can be used for mounting OK couplings, large pressure joints such as bearings, flywheels, railway wheels and couplings. the full unit consists of a hydraulic pump...

this THAP150E-10 is a repair kit for the SKF THAP150E air driven pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAP150E/SK1 is an air driven pump set, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels This set contains 1x THAP150E - air driven pump,...

This THAP200E is an air driven pump, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels.Related DocumentsProduct Data...

this THAP200E-10 is a repair kit for the SKF THAP200E air driven pump.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF air-driven hydraulic pumps are available in four different pressure versions. they can be used for mounting OK couplings, large pressure joints such as bearings, flywheels, railway wheels and couplings. the full unit consists of a hydraulic pump...

this THAP200E-10 is a repair kit for the SKF THAP200E air driven pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAP300E-7 is a replacement oil injector for the SKF THAP300E air driven pump.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAP300E/SK1 is an air driven pump set, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels This set contains 1x THAP300E - air driven...

This THAP400E/SK1 is an air driven pump set, this pump is used for mounting and dismounting OK couplings and for dismounting large pressure joints such as bearings, couplings, railway wheers and flywheels This set contains 1x THAP400E - air driven...

This THAPE-12 is a replacement carrying handle for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-3 is a replacement air valve assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-4 is a replacement air inlet block for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-5 is a replacement air motor assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-6 is a replacement oil inlet block for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-8 is a replacement release valve assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

This THAPE-9 is a replacement connection nipple assembly for the THAP SKF air driven pumps and oil injectors.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF pressue gauges have been designed to fit SKF hydraulic pums and oil injectors. The gauges are all liquid filled and equipped with a restriction screw in order to absorb any sudden pressure drop, preventing damage.Related DocumentsProduct Data...

This THKI-1 is a replacement stand for the THKI series oil injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This THKI-2 is a replacement nipple set for the THKI series oil injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This THKI-3 is a repair kit for the THKI series oil injector.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH030-YS is a replacement standard yoke set 2x 45x45x100mm for use on the TIH030 series small induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100-PMV is a replacement power print for the TIH100/MV medium induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100-SW is a replacement swivel set for the TIH100 series medium induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH100-Y8 is a replacement standard yoke 56x56x296mm for use on the TIH100 series medium induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-PLV is a replacement power print for the TIH220M/LV Large induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-PMV is a replacement power print for the TIH220M/MV Large induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-PUS is a replacement power print for the TIH220M series Large induction heater.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-Y10 is a replacement standard yoke 70x70x430mm for use on the TIH220 series large induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-Y4 is a replacement optional yoke 28x28x430mm for use on the TIH220 series large induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220-YS is a replacement support yoke set 2x 70x70x150mm for use on the TIH220 series large induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIH220M/MV is a large induction heater that is reliable and robust. This induction heater has an advanced design of its power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote...

This TIHCP is a replacement control print for use on the TIH series bearing induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIHRC3 is a replacement remote control for use on the TIH L33 series bearing induction heaters.Related DocumentsProduct Data Sheet  Instructions for Use 

This TIHT1 is a replacement trolley for use on the TIH series bearing induction heaters.Related DocumentsProduct Data Sheet 

SKF offer a range of three different belt alignment tools to enable accurate alignment for most applications. The tools have been designed to be easy to use without special training, the laser position indicates the nature of misalignment allowing easy...

This TKES10-BAT is a replacement battery for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKES10-BAT is a replacement power adapter for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKES10-DU is a replacement display unit with standard accessories, without tube in a case for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF endoscopes are first line inspection tools that can be used for internal inspection of machinery. they help to minimise the need to disassemble machinery, saving time and money.Display UnitRelated DocumentsProduct Data Sheet  Instructions...

SKF endoscopes are first line inspection tools that can be used for internal inspection of machinery. they help to minimise the need to disassemble machinery, saving time and money.Display UnitRelated DocumentsProduct Data Sheet  Instructions...

This TKESTA-3 is a replacement 3m articulated tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTF-1 is a replacement 1m flexible tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTF-2 is a replacement 2m flexible tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTF-3 is a replacement 3m flexible tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTF-5 is a replacement 5m flexible tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTS-1 is a replacement 1m semi-rigid tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTS-2 is a replacement 2m semi-rigid tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTS-3 is a replacement 3m semi-rigid tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKESTS-5 is a replacement 5m semi-rigid tube for use on the TKES series video endoscopes.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKGT1-RK1 is the SKF refill kit 1 fpr the SKF TKGT1 grease testing kit, this kit contains 20x sampling containers, 2x set of plastic disposable spatulas, 2m of sampling tube, 1x paper pack (50 sheets), 1x plastic mask, 20 pairs of gloves.Related...

SKF stroboscopes are portable, compact and easy to use, they enable the motion of rotating or reciprocating machinery to appear frozen, this allows such applications as fan blades, couplings, gear wheels, machine tool spindles and belt drives to be...

This TKRS41-PROT is a replacement rubber side protectors for use on the TKRS41 high performance SKF stroboscope.Related DocumentsProduct Data Sheet  Instructions for Use 

SKF Tachometers are fast and accurate instruments utilizing laser or contact to measure rotational and linear speeds.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA11-EXTCH is a replacement extension chain for the SKF TKSA11 shaft alignement tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA11-MBH is a replacement magnetic bar holder for the SKF TKSA11 shaft alignement tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKAS11/KIT380 is a promotional kit that contains the SKF TKSA11 innovative shaft alignment tool and the SKF TMAS380 shim kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKAS11/KIT75 is a promotional kit that contains the SKF TKSA11 innovative shaft alignment tool and the SKF TMAS75 shim kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA31 is a laser shaft alignment tool. This alignment tool has an ergonomic display unit with touch screen to make the instrument very easy to use, live view and automatic measurement are a few of the other additional functions this system has...

This TKSA31-DU is a replacement display unit for the TKSA31 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA31-M is a replacement M measuring unit including USB cable for the TKSA31 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-QR is 5x a5 sheets with 6x qr code stickers per sheet for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA41-STDCH is 2x replacement 400mm standard chain for the TKSA41 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

The SKF TKSA 51 is a wireless laser shaft alignment system. This tool, designed to work with the shaft alignment apps on a tablet or smartphone, is intuitive and easy to use, requiring no special training. At Quality Bearings Online, we understand the...

This TKSA51-EXTCH is a replacement extension chain for the SKF TKSA51 shaft alignement tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-ROD80 is 4x replacement threaded rods of 80mm for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-SLDBK is a replacement adjustable sliding bracket for use with shaft diameters >30mm or bore diameters > 120mm, supplied without rods, for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for...

This TKSA51-SPDBK is a replacement spindle bracket supplied with 2x threaded rods of 80mm for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA51-VBK is a replacement standard V bracket supplied with 2x threaded rods of 80mm, 1x standard chain of 480mm and 4x magnets for the TKSA51 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKAS51/KIT360 is a promotional kit that contains the SKF TKSA51 innovative shaft alignment tool and the SKF TMAS360 shim kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA71 is a laser shaft alignment system. This alignment tool has been designed to work with the shaft alignment apps on a tablet or smartphone, this intuitive tool is easy to use and requires no special training.Related DocumentsProduct Data...

This TKSA71-M is a replacement M measuring unit including USB cable for the TKSA71 shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKAS71/360 is a promotional kit that contains the SKF TKSA71 innovative shaft alignment tool and the SKF TMAS360 shim kit.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSA71D2 is a wireless laser shaft alginment system with rugged display tablet.Related DocumentsProduct Data Sheet  Instructions for Use 

This TKSADISPLAY2 is a replacement industrial display device (Android tablet with protective cover and preinstalled apps) used with the TKSA series shaft alignment tool.Related DocumentsProduct Data Sheet  Instructions for Use